SMART Technical Issues

SMART communicates with the trading server via various TCP Ports and automatically detects the correct communications settings from your Internet Explorer setup.

If you are having problems using SMART and you are situated behind a firewall or proxy server, check with your system administrator that the relevant ports are open as follows:

For the best performance:

  • Port 1001 should be open in your firewall/proxy server for outgoing access to mitssimul.iitech.dk (IP Address 193.178.175.38). This port is used for encrypted communications with the trading server.
  • A HTTP port (port 80 or 8080) must be open; this port is used for program downloads and for web pages in SMART.

Optimal Solution

Raw Protocol Direct
Remote Server Settings
Trader Server Name mitssimul.iitech.dk
Use HTTP No
Port 1001(must be open in Firewall)
Proxy Server Settings
Connect Via Proxy Server No
SOCKS Protocol Version N/A
Server Name N/A
Port N/A
Username N/A
Password N/A
Notes: Use this configuration if you have a Proxy/Firewall Client. No further proxy information should be required by SMART. If your site uses a firewall, Port 1001 must be opened for IP address 193.178.175.38 or DNS name mitssimul.iitech.dk.
Advantages: This is the preferred operating mode as it allows faster data transfers between the server and SMART.

Alternative Solutions

If it is not possible to open this port due to strict firewall policy, SMART can be configured to use:


HTTP Tunnelling via HTTP Proxy
Remote Server Settings
Trader Server Name mitssimul.iitech.dk
Use HTTP Yes
Port N/A
Proxy Server Settings
Connect Via Proxy Server Yes
SOCKS Protocol Version N/A
Server Name DNS or IP Address of HTTP Proxy Server
Port Typically 80 or 8080
Username User Id for proxy authentication
Password Password for proxy authentication
Notes: If port 100l cannot be opened (for example due to strict firewall policies), SMART can be set up to run in HTTP mode where all communications between the server and SMART use the HTTP Port.
Advantages: Port 1001 does not need to be open on the firewall.
Disadvantages: This mode of operation is considerably slower than the raw protocol solution.


SOCKS Proxy
Remote Server Settings
Trader Server Name mitssimul.iitech.dk
Use HTTP No
Port 1001(must be open in Firewall)
Proxy Server Settings
Connect Via Proxy Server Yes
SOCKS Protocol Version 4(a) or 5
Server Name DNS or IP Address of Socks Proxy Server
Port Typically 1080
Username User Id for proxy authentication
Password Password for proxy authentication (version 5 only)
Notes: If your site uses a firewall, Port 1001 must be open for IP address 193.178.175.38 or DNS name mitssimul.iitech.dk.
Advantages: This is the preferred operating mode as it allows faster data transfers between the server and SMART.
Disadvantages: Requires a Proxy Server that supports the Socks Protocol.


HTTP Tunnelling Direct
Remote Server Settings
Trader Server Name mitssimul.iitech.dk
Use HTTP YES
Port 80
Proxy Server Settings
Connect Via Proxy Server No
SOCKS Protocol Version N/A
Server Name N/A
Port N/A
Username N/A
Password N/A
Advantages: Does not require Port 1001 to be opened in the firewall.
Disadvantages: This mode of operation is considerably slower than port 1001 communications.

Remote Server Settings

Trade Server Name This is the DNS name or IP address of the trading server and should not be changed unless instructed to do so by us.
TCP/IP Port SMART supports a proprietary TCP/IP protocol for communications with the trading server. This protocol offers efficient communications with the trading server and we recommend its use where possible.
Use HTTP

To set up SMART to communicate with the trading server using HTTP tunnelling instead of the proprietary protocol, check the Use HTTP check box. This may be required to allow the SMART to communicate with the trading server through your firewall or proxy server.

The proprietary TCP/IP protocol (non-HTTP) is the preferred operating mode as it allows faster data transfers between the server and SMART.
Proxy Server Settings
Connect via proxy server Check the Connect via proxy server check box to set up set up SMART for communications through a proxy server.
SOCKS

If SMART is configured to communicate using the proprietary protocol (recommended configuration), the SOCKS protocol must be used on your Proxy Server and the correct SOCKS version must be selected. Select the SOCKS protocol version in use on your Proxy Server (versions 4a and 5 are supported).

If SMART is configured to communicate using HTTP tunnelling (the Use HTTP check box is checked), the proxy is assumed to be a HTTP proxy and the SOCKS protocol is not used.
DNS or IP Address Enter either the DNS name or the IP address of your proxy server as seen from your network. We recommend the use of DNS names where possible as this can make traversing address translation (NAT) solutions simpler.
User Name and password

Enter the User name and Password if required by your proxy server.

If your proxy uses the SOCKS protocol version 4a, User Name only is supported by this protocol. SOCKs protocol version 5 supports both User Name and Password.

HTTP proxies can be configured for User Name and Password for basic or digest authentication.
Port Typical Proxy Ports:
HTTP Proxy : 80 or 8080
SOCKS Proxy : 1080
Communications Settings
Enable communications log Check the Enable communications log check box to enable logging of communications between SMART and the trading server. This is typically done for troubleshooting purposes.
  • Multi-product Trading
  • Live Market Prices
  • Research and Charting
  • Free 30 Day Demo

Risk Warning

Read full warning here

Unless private clients are satisfied derivatives trading is suitable for them
and have sought professional advice,
they should not invest.

Download Demo